How to make LED lighting in the cabinet

The modern model of the wardrobe is furniture of impressive sizes, in which the most various compartments and shelves for storing many things are made. To quickly find the necessary things in this furniture, you will need to go to the switch each time, in order to ignite the general light. This is not always convenient. There is a more original solution - to make LED lighting directly in the furniture.Consider how to make LED lighting in the cabinet when opening the doors with your own efforts, so that it is always light and easy to find the necessary things.

LED lights

To make the furniture much lighter inside, you can choose one of the many lighting options and you can implement it yourself.Among the variety, LED backlighting is most popular.

This is a very convenient and practical option. Having mounted just such a backlight, you can be sure that it will not be difficult to find the necessary things in the closet, because it will always be light in it when you look into it.

LED backlighting is safe, the risk of fire is minimal. The whole installation process will take a little of your time, and the result is worth it.

What is required

In order to make lighting in the cabinet yourself, you need to prepare some materials:

  1. Directly tape and, of course, power supply. Measure yourself how long the tape will be needed for you, it depends on the size of your cabinet and the desired effect. Experienced experts recommend giving preference to white color, this will minimize the likelihood of color distortion of products.
  2. Aluminum profile.
  3. Limit switch.
  4. ShVVP type wire with a section of 2x075.
  5. Switch.

Having prepared all the positions from this list, you can independently assemble the desired backlight scheme in the cabinet. It is not as difficult as it might seem at first glance.

Electric circuit

Before proceeding to the assembly phase, consider this item. You must have an electrical circuit to make future connections. In the picture you can see how it should look. Its main difference from the usual circuit is the presence of a microswitch. When connecting, be careful not to mess up anything.

IMPORTANT. In order for everything to be safe and working properly, follow the diagram when connecting.

 

Assembly is the main process

  • First of all, you will need to prepare the LED strip itself. Cut off the area you need and, on the one hand, solder the wires about 20 cm long. Do this at this stage so that you do not then stand with the soldering iron in an uncomfortable position.
  • The tape is glued to the profile, after which you can proceed to fasten the entire structure. To do this, you can use liquid nails. This process is very simple.
  • The next step is to determine where the power supply will be installed. You can lay wires behind the cabinet and make a hole in the cabinet wall.

REFERENCE. Best of all, if you think about laying wires at the stage of repair work. This is the most rational decision.

  • Connect a microswitch to one of the wires at the break. His contacts should be open when the button is pressed.

IMPORTANT. In the cabinet, the wire must be laid in a special cable channel.

Test your creation for performance. If everything works well, you can fix the microswitch on one of the cabinet walls. Now in your casket it will not be difficult to find the necessary things.

Watch the video: DIY How to Install Cabinet Accent LED Lighting. MiLight LED Controller (March 2024).

Leave Your Comment