PC does not see the joystick

There are many reasons why a PC cannot detect a joystick. You need to familiarize yourself with the most common problems and how to solve them.

Why the PC does not see the joystick

There are several reasons for this phenomenon:

1. Some joysticks only work with drivers. If they are not on the computer, the gamepad will not work.
2. The drivers may have already been installed, but they require a reboot to work.
3. There is a possibility of damage to the wires of the device itself. This applies not only to external defects, but to damage to the insulation of the internal cable. Another problem - the contacts between the wires and the plug are stuck.
4. Another common reason is a broken USB connector.
5. Remember that there are 2 types of devices - wired and wireless. If the former simply connect to the computer through the appropriate connector, the latter require a receiver and bluetooth.
6. Damage to the internal parts of the joystick.

Reference! An important factor is the Windows installed on the PC.

How to find a reason

The joystick is checked as follows:

1. You need to check if the drivers are installed and if there is an update.
2. If you just updated the driver, restart your computer.
3. Try changing the connector you are using. If this does not help, and you are convinced that the cause of the breakdown in the wire, for example, the joystick starts to work, if you touch the wires, or the latter show defects, it is better to contact a service center for help.
4. Try connecting another device to the port, for example, a USB flash drive. If the PC does not see it either, then the reason is in the connector. If the USB connector breaks, you will also have to contact the service center, but you need to carry not a joystick, but a computer.
5. Defining a wireless and wired joystick is very simple, the latter has a cable with a plug on the end.

Reference! If you suspect that parts inside the controller are damaged, try to disassemble it and look at the internal parts for damage. But if you are afraid to damage something, it is better to contact an expert.

How to fix the problem

The resolution of the problem also depends on the cause:

1. After updating the driver, a message should appear asking you to restart the computer. Often the Reload button is on the window itself.
2. If the wire breaks, it is better to contact a service center. But if you know how to work with a soldering iron, and you know the device of the wire and the location of the contacts, you can do all the work yourself.
3. But replacing the connector on the computer at home is very difficult. Here you can’t do without the help of a master.
4. If you use a wireless device, you need to buy a receiver and install it on your computer (most often it connects to a USB connector). In addition, special drivers are required for its operation. Do not forget to turn on the bluetooth.

Attention! Repairing the joystick yourself is not recommended. If you know where the parts are, you can try replacing them yourself, but it is better to contact a service center.

The most common problem is missing drivers. They are set as follows:

1. There must be a drive with a joystick. We insert it into the drive. If it is not, download the driver from the Internet.
2. We start the installation. We agree to all the terms by clicking Next and Install.
3. We are waiting for the installation to complete. Usually about 2 minutes.
4. Click the Finish button.
5. We restart the computer for all changes to take effect.
6. Trying to launch the joystick.

Finding a problem why the PC does not see the gamepad is easy. However, you must follow all instructions to resolve the problem.