How to open the drive on a laptop

A device that allows you to read and write information directly to the media in the modern world, although not in great demand, however, in some situations it is considered forced. Thus, the user needs to know the methods that will help him open the mechanism. About them will be discussed in the written article. And also consider the possible obstacles in this case and options for their elimination.

How to open the drive button

For most laptop models from different manufacturers, it is possible to reproduce the opening thanks to a certain press. Often the product is located on the side or on the surface of the disk drive.

Attention! Preliminary, it is recommended to verify the presence of the structure. For this, it is advisable to refer to the documentation of the equipment, where all the characteristics assigned to it are collected.

In addition, you can consider the body of the unit. There should also be a rectangle labeled "DVD", and in the task manager, in fact, indicate its version. So, if you have found the relevant information, then you should go directly to the main process - discovery. As is known, the location varies by computer model. So, the most common: the area, located near the sliding tray; optical drive cover; lateral part (usually right) of the invention. In any case, you just need to hold the part for a while and wait until the drive comes out. It takes a small number of seconds - from one to three. The key is easy to find, since it is indicated by a special character as an arrow or a dash.

Why the drive does not open when you click

Every technology is prone to fail, so any malfunction is a natural phenomenon. It is not necessary to resolve the situation by sending for repair. It is likely that the user is able to handle on his own. However, this requires appropriate knowledge and skills. So, first, of course, it is impossible to find out the source of the defect. But often the problem is temporary. Therefore, you just need to restart the computer and try again. If it did not work out, then gradually proceed to the following manipulations:

• The first thing is recommended to restart the laptop. It can be said that due to this action all program parameters and commands in the control will be reset.
• Most likely, you are in a hurry to install the disk correctly. Consequently, the contact is closed inside, and this will require little physical effort. To do this, arm yourself with a sharp object. It is desirable that its end was slightly blunt. Thus, it is worth trying to clamp the part and at the same time help it open with, for example, a knife. Here it is important not to overdo it, since it is possible that the disk inside has burst and crumbled.
• It also makes sense to consider the situation in which a mechanical problem was formed, namely the failure of the gears. But they are responsible for the nomination of the compartment that is required for installation. For such cases, the developers have provided for the implementation of the function through an emergency exit. To do this, the owner must get a clip to manually set the device in motion. On the front panel you can find a small hole. It is necessary to shove a thin material into it (the needle is also suitable for the operation) and press lightly. As a result, the design should automatically work. Thus, the long-awaited stage will occur.
• Do not forget that the electronic card may also be faulty.
• In some moments, the malicious software blocks the CD itself. Therefore, it will not be superfluous to update anti-virus platforms and check the system.
• In the end, the windows operating system may lose touch with the drive. Usually this occurs due to various errors in the OS. In this case, even a reboot will not be able to help in correcting the situation. It is necessary to completely disconnect the equipment from the mains, remove the battery for a few minutes. After that, return the parts to the original location and bring the laptop to working condition.

How can I open the drive without a button

When using standard software, technology activation is also available using software methods. For example, the following is a sequence that can accurately trigger a DVD:

1. First you need to contact my computer. If you are the owner of 8 or 10 OS versions, then you will have instead of "my" - "this."
2. In any case, folders will be available. From them, you should select the drive icon and click on it with the right mouse button.
3. After that, a window is displayed in which it is permissible to mark the line “extract”. Usually it is in the middle of the list.
4. In conclusion, the tray itself is obliged to climb out for a minimum distance. If this does not happen, then you have to turn it off again - turn on and run the described algorithm right from the beginning.

Some users do not display the graph of the desired product. Then you should perform the following points:

1. Use the auxiliary key on the mouse to designate “start” and click on the name “command line (administrator)”.
2. After that, you can insert the task "HKLM System CurrentControlSet Services atapi Controller0" / f / v EnumDevice1 / t REG_DWORD / d 0x00000001 "and then press the input.
3. The very last step will be to reset the invention. So, after all the above operations, the CD should appear in the directory.

In addition, the described product may not exist at all. For example, it cannot be found on some representatives of Asus. At the same time, it is necessary to try a separate method in which the keyboard is involved. At the very top, where the functional tools are located, one should find the one that has the name “extraction”. If it is present on the panel, then it is important to clamp it in combination with “Fn”.

Reference! If the device has blocked the exit, then it is better to make out two options for the outcome of the event. The first involves the closure of processes in the task manager, and the second is the use of the Unlocker application.